How to Cover Chimney Hole
How to cover chimney hole – First, let’s get some terminology straight. Chimney chase is the height of the chimney exterior decorative parts, as you can see from the outside when you don’t have a chimney rock solid. Chimney chase cover is Cap metal fabrication designed to fit over the pursuit of your chimney. Chase does not include the stone chimneys: they are for (the Chase) which houses and factory built chimney. The purpose of that cover the chimney chase is to keep rain, dirt and animals-and it really is the stuff you don’t want in your chimney. You want to buy an appropriate coverage.
You should allow approximately ¼ to ½ inch all the way around, and the cover must be located from the pursuit of about an eighth to a ¼ inch. This ensures coverage was not too restrictive to install how to cover chimney hole but protect your chimney above the rest of the small animals while leaving enough space to allow a little ventilation. The materials used also matter. Chase covers can be made of copper, aluminum, galvanized and stainless steel and copper, and each type has something else to offer.
Design is another consideration. You will also want to cross break in your coverage, it looks like a large X from corner to corner and keep the lid from catering and collect water (which is actually why most galvanized chase covers need replacing). There are also drop-side and the collar to consider how to cover chimney hole. The sides usually range between two and six inches, while three or four inches is pretty standard. While the top collar (around the chimney hole emerged through) is not strictly necessary, it is a nice feature good Chase closes; they are usually 2 inches high.